+
  • 5(1).jpg

Solvent free self leveling intermediate coating

This product is a two component floor paint, consisting of A component (color paint) and B component (curing agent) as solvent free coatings. It has no odor, is environmentally friendly, has good dryness and wear resistance, strong hardness, good flowability, and good sealing.

Details

1、 Product Introduction
This product is a two component floor paint, consisting of A component (color paint) and B component (curing agent) as solvent free coatings. It has no odor, is environmentally friendly, has good dryness and wear resistance, strong hardness, good flowability, and good sealing.
2、 Usage method
(1) Before use, component A (paint) should be thoroughly stirred with an explosion-proof mixer, and high-speed stirring for 1-3 minutes is suitable. For precipitation caused by long-term storage of component A (paint), it must be stirred evenly before use.
(2) A component (paint) and B component (curing agent) should be weighed using a standard measuring device according to the proportion indicated on the packaging label to ensure their accuracy. After mixing, they should not be mixed randomly to avoid affecting the curing effect of the material.
(3) Mix the AB components and add the necessary quartz sand for construction. The amount of addition can be based on the actual situation of workers and the ground, and the amount added has no impact on the quality. After the addition is completed, it is necessary to use a high-speed mixer to stir evenly, usually for 2-3 minutes. The best method is to construct the mixed material at a temperature above 25 ℃ and use it within 20 minutes. The shorter the storage time, the better the effect after use.
(4) Pour the prepared materials onto the floor and have professional construction workers carry out the construction according to the requirements to achieve the desired effect, usually using the scraping method.
(5) This product can be configured as epoxy putty or used as a filling material by adding powder.
3、 Precautions:
(1) This product belongs to flammable chemicals. Please stay away from ignition sources and use explosion-proof motors for the mixer.
(2) This product should be stored in a cool and ventilated place and should not be exposed to the sun.
(3) Do not use this product at a temperature below 5 ℃ for construction, as low temperatures can affect the curing time. The humidity should not exceed 70%, as excessive humidity can cause whitening and uneven color on the surface of the paint film.
(4) When used at low temperatures, if the material viscosity is high, a special diluent can be added at a rate of 2-3% of the total AB mixing amount for use.
(5) During the construction process, if materials are accidentally splashed into the eyes, they should be promptly rinsed with clean water and sent to the hospital for treatment.

Other Products

I want to consult

Submission