+
  • 4(1).jpg

Solvent-free self flowing flat paint

This product is a solvent-free solvent based two component floor paint, consisting of A component (color paint) and B component (curing agent) as thick paste coatings. It has high solid content, good wear resistance, strong hardness, good film fullness, and good flowability. VOC emissions meet international environmental quality standards, and there is no obvious irritating odor during the construction process.

Details

Product Introduction:
This product is a solvent-free solvent based two component floor paint, consisting of A component (color paint) and B component (curing agent) as thick paste coatings. It has high solid content, good wear resistance, strong hardness, good film fullness, and good flowability. VOC emissions meet international environmental quality standards, and there is no obvious irritating odor during the construction process.
Usage method
1. Before use, component A (paint) should be thoroughly stirred with an explosion-proof mixer, and high-speed stirring for 1-3 minutes is suitable. For precipitation caused by long-term storage of component A (paint), it must be stirred evenly before use.
2. Component A (paint) and component B (curing agent) should be weighed using a standard measuring device according to the proportion indicated on the packaging label to ensure their accuracy. After mixing, they should not be mixed randomly to avoid affecting the curing effect of the material.
3. The mixed AB components must be stirred evenly with a high-speed mixer, usually for 2-3 minutes. The best method is to construct the mixed material at a temperature above 25 ℃ and use it within 20 minutes. The shorter the storage time, the better the effect after use.
4. Pour the mixed material onto the pre constructed ground and use a professional scraper to evenly scrape it open. During the process of scraping, there will be scraper marks, but after 20 minutes, the marks will naturally disappear, forming a flat and seamless surface
Precautions:
1. This product belongs to flammable chemicals, please stay away from ignition sources, and use explosion-proof motors for the mixer.
2. This product should be stored in a cool and ventilated place and should not be exposed to the sun.
3. When using this product, the temperature should not be lower than 5 ℃ for construction, as too low a temperature can affect the curing time. The humidity should not exceed 70%, as excessive humidity can cause whitening and uneven color on the surface of the paint film.
4. During use, this product has a high relative material viscosity and requires the addition of 1-3% environmentally friendly active diluent.
5. If materials are accidentally splashed into the eyes during the construction process, they should be promptly rinsed with clean water and sent to the hospital for treatment.

Other Products

I want to consult

Submission