+
  • logoImg.jpg

Conductive primer and intermediate coating

This product is a two component floor paint, consisting of two parts: A component (color paint) and B component (curing agent), forming a wave coating type coating. It has good dryness and wear resistance, strong hardness, good film sealing, large filling amount, stable conductivity, good conductivity, and the lowest conductivity reaching the conductor.

Details

1、 Product Introduction
This product is a two component floor paint, consisting of two parts: A component (color paint) and B component (curing agent), forming a wave coating type coating. It has good dryness and wear resistance, strong hardness, good film sealing, large filling amount, stable conductivity, good conductivity, and the lowest conductivity reaching the conductor.
2、 Usage method
(1) Before use, component A (resin) should be thoroughly stirred with an explosion-proof mixer, and high-speed stirring for 1-3 minutes is suitable. For precipitation caused by long-term storage of component A (paint), it must be stirred evenly before use.
(2) A component (resin) and B component (curing agent) should be weighed using a standard measuring device according to the proportion indicated on the packaging label to ensure their accuracy. After mixing, they should not be mixed randomly to avoid affecting the curing effect of the material.
(3) The mixed AB component can be added with quartz sand required for construction during the intermediate coating process. The amount of addition can be based on the actual situation of workers and the ground, and the amount added has no impact on the quality. After the addition is completed, it is necessary to use a high-speed mixer to stir evenly, usually for 2-3 minutes. The best method is to construct the mixed material at a temperature above 25 ℃ and use it within 20 minutes. The shorter the storage time, the better the effect after use.
(4) When making the primer, do not use any materials and can be used directly. The construction can be done by rolling and scraping.
(5) This product can be configured as epoxy putty or used as a filling material by adding powder.
3、 Precautions:
(1) This product belongs to flammable chemicals. Please stay away from ignition sources and use explosion-proof motors for the mixer.
(2) This product should be stored in a cool and ventilated place and should not be exposed to the sun.
(3) During the construction process, if materials are accidentally splashed into the eyes, they should be promptly rinsed with clean water and sent to the hospital for treatment.

Previous

Next

Previous

Next

Other Products

I want to consult

Submission