+
  • logoImg.jpg

Colored sand epoxy self flowing flat coating

This product is developed on the basis of high solid epoxy direct current flat coating and is also a two component floor paint. The material is added with colored floating sand to improve the strength and surface aesthetics of the surface coating. It is mainly used in high-end commercial venues and working environments. There are also two components, A component (paint) and B component (curing agent), which make up a thick paste coating. It has high solid content, good wear resistance, strong hardness, good film fullness, and good flowability. The surface is decorated with colored sand, making it more beautiful.

Details

1、 Product Introduction
This product is developed on the basis of high solid epoxy direct current flat coating and is also a two component floor paint. The material is added with colored floating sand to improve the strength and surface aesthetics of the surface coating. It is mainly used in high-end commercial venues and working environments. There are also two components, A component (paint) and B component (curing agent), which make up a thick paste coating. It has high solid content, good wear resistance, strong hardness, good film fullness, and good flowability. The surface is decorated with colored sand, making it more beautiful.
2、 Usage method
(1) Before use, component A (paint) should be thoroughly stirred with an explosion-proof mixer, and high-speed stirring for 1-3 minutes is suitable. For precipitation caused by long-term storage of component A (paint), it must be stirred evenly before use.
(2) A component (paint) and B component (curing agent) should be weighed using a standard measuring device according to the proportion indicated on the packaging label to ensure their accuracy. After mixing, they should not be mixed randomly to avoid affecting the curing effect of the material.
(3) The mixed AB components must be stirred evenly with a high-speed mixer, usually for 2-3 minutes. The best method is to construct the mixed material at a temperature above 25 ℃ and use it within 20 minutes. The shorter the storage time, the better the effect after use.
(4) Pour the mixed material onto the pre constructed ground and use a professional 3.66mm rake to evenly scrape it open. At the same time, make sure to use a defoaming roller for defoaming, which also promotes leveling. There are traces during the construction process, but after 20 minutes, the traces will naturally disappear, forming a flat and traceless surface.
(5) This product requires a usage requirement of 2.5-3 kg/㎡
3、 Precautions:
(1) This product belongs to flammable chemicals. Please stay away from ignition sources and use explosion-proof motors for the mixer.
(2) This product should be stored in a cool and ventilated place and should not be exposed to the sun.
(3) Do not use this product at a temperature below 5 ℃ for construction, as low temperatures can affect the curing time. The humidity should not exceed 70%, as excessive humidity can cause whitening and uneven color on the surface of the paint film.
(4) When used at low temperatures, if the material viscosity is high, a special diluent can be added at a rate of 1-2% of the total AB mixture.
(5) During the construction process, if materials are accidentally splashed into the eyes, they should be promptly rinsed with clean water and sent to the hospital for treatment.

Previous

Next

Previous

Next

Other Products

I want to consult

Submission