+
  • logoImg.jpg

Zou pattern epoxy mortar intermediate coating

This product is a two component floor paint, consisting of two components: A component (color paint) and B component (curing agent), forming a wave coating type coating. It has good dryness and wear resistance, strong hardness, and solves the problem of roller marks on textured surfaces, resulting in higher cost-effectiveness.

Details

1、 Product Introduction
This product is a two component floor paint, consisting of two components: A component (color paint) and B component (curing agent), forming a wave coating type coating. It has good dryness and wear resistance, strong hardness, and solves the problem of roller marks on textured surfaces, resulting in higher cost-effectiveness.
2、 Usage method
(1) Before use, component A (paint) should be thoroughly stirred with an explosion-proof mixer and stirred at high speed for 1-3 minutes. Due to the long storage time, component A (paint) will not precipitate.
(2) A component (paint) and B component (curing agent) should be weighed using a standard measuring device according to the proportion indicated on the packaging label to ensure their accuracy. After mixing, they should not be mixed randomly to avoid affecting the curing effect of the material.
(3) After mixing the AB components, it is necessary to use a high-speed mixer to stir evenly, usually for 2-3 minutes. The best method is to construct the mixed material at a temperature above 25 ℃ and use it within 20 minutes. The shorter the storage time, the better the effect after use.
(4) Pour the prepared material onto the construction surface, scrape it evenly with a scraper, and then use a roughening roller to recycle it evenly.
3、 Precautions:
(1) This product belongs to flammable chemicals. Please stay away from ignition sources and use explosion-proof motors for the mixer.
(2) This product should be stored in a cool and ventilated place and should not be exposed to the sun.
(3) The size, amount, or thickness of the texture is determined by the thickness of the drape material,
(4) During the construction process, if materials are accidentally splashed into the eyes, they should be promptly rinsed with clean water and sent to the hospital for treatment.

Previous

Next

Previous

Next

Other Products

I want to consult

Submission