+
  • logoImg.jpg

Acrylic polyurethane

This product belongs to acrylic polyurethane floor paint, which is also a two component solvent floor paint. It consists of two parts: A component (color paint) and B component (curing agent) to form a wave coating type coating. It has high solid content, good wear resistance, strong hardness, good film fullness, good flowability, fast drying speed, and is easy to apply and use. It is mainly used outdoors to prevent ultraviolet radiation. This product is commonly used in outdoor stadiums, sports stands, and roads in landscape communities.

Details

1、 Product Introduction
This product belongs to acrylic polyurethane floor paint, which is also a two component solvent floor paint. It consists of two parts: A component (color paint) and B component (curing agent) to form a wave coating type coating. It has high solid content, good wear resistance, strong hardness, good film fullness, good flowability, fast drying speed, and is easy to apply and use. It is mainly used outdoors to prevent ultraviolet radiation. This product is commonly used in outdoor stadiums, sports stands, and roads in landscape communities.
2、 Usage method
(1) Before use, component A (paint) should be thoroughly stirred with an explosion-proof mixer, and high-speed stirring for 1-3 minutes is suitable. For precipitation caused by long-term storage of component A (paint), it must be stirred evenly before use.
(2) A component (paint) and B component (curing agent) should be weighed using a standard measuring device according to the proportion indicated on the packaging label to ensure their accuracy. After mixing, they should not be mixed randomly to avoid affecting the curing effect of the material.
(3) The mixed AB components must be stirred evenly with a high-speed mixer, usually for 2-3 minutes. The mixed materials can be used for construction at temperatures above 25 ℃, and this product can operate for a long time and is easy to construct.
(4) Fill the material with a pre prepared roller and evenly roll it onto the ground. Generally, it is required to roll the brush for the first time and completely cure (the material has dried) before evenly applying the second time.
3、 Precautions:
(1) This product belongs to flammable chemicals. Please stay away from ignition sources and use explosion-proof motors for the mixer.
(2) This product should be stored in a cool and ventilated place and should not be exposed to the sun.
(3) Do not use this product at a temperature below 5 ℃ for construction, as low temperatures can affect the curing time. The humidity should not exceed 70%, as excessive humidity can cause whitening and uneven color on the surface of the paint film.
(4) When used at low temperatures, if the material viscosity is high, a special diluent can be added at a rate of 2-3% of the total AB mixing amount for use.

Previous

Next

Previous

Next

Other Products

I want to consult

Submission